Pan head combination screws manufacturer in India

Pan head combination screws manufacturer, Pan head combination screws supplier, Pan head combination screws exporter, Pan head combination screws trader in India - Bhalla Fasteners

Pan head combination screws manufacturer in India

Pan head combination screw draw their name from the appearance of their head, which is similar to an upside-down frying pan. Pan head combination screw are a common head type of non-countersunk screw head used in wood screws, machine screws , self-drilling screws, and self-tapping screws.

Pan combination screw have a recessed socket with wide heads, a flat bearing surface, high vertical, chamfered, or curved sides, and a flat or slightly domed top surface. The socket is basically a slot, particularly for wood and self-tapping screws. Hexagon sockets are most common for machine screws.

Bhalla Fasteners is the leading  manufacturer, supplier and exporter  Pan head combination screw used in wood applications in USA ,UK ,Poland, Germany , Austrailia, Ireland, and European countries. Bhalla Fasteners also is the leading supplier of pan head combination screw of size 6x15 mm and 6x18 mm to various pipe clamp manufacturers in Mumbai ,Pune, Chennai ,Maharashtra, Gujrat and Tamil Nadu.

Pan combination screw are used in a wide range of applications, including:

• Where a flat bearing surface is required
• There’s a risk of the head being caught in use
• A decorative fixing design is desired.

The big diameter of pan head combination screw, combined with high edges, provides a large, deep socket. This enables high torque during assembly while minimizing  pressure which could result in damage to the screw. The flat underside of a pan head screw provides a large mating surface area, which allows a firm hold, even with enlarged holes, and minimizes crushing.

The flat or slightly domed profile provides a basic trim finish for decorative applications and minimizes the risk of catching the pan combination screw head while in use. Pan head screws employ a variety of socket types or drive designs, including slotted, Phillips, hexagon socket, Pozidriv, Torx, and square drive. They may be zinc-plated, white-coated, black-coated and non-coated stainless steel.

Pan head machine screws are typically used where a hex head might catch or would appear out of place, but where the material is not thick enough to support a countersunk hole. Pan heads with slotted sockets are also best suited to light applications and can be fastened more conveniently using a screwdriver.

Pan head combination screw are used to fasten flat materials to timber.

Pan head combination screw are similar to round heads, truss heads, and binding heads, although pan heads have largely replaced these other heads in modern screws. Round-head screws have a domed head and a small bearing surface, applications where using round heads demand a high level of aesthetics. Truss head screws have an extra-wide head and a low profile, applications using truss head screws require coverage for large holes or extra-low clearance.

Binding head screws have an extra deep head and socket, applications using binding head screws require extra high tightening torque.

Thread :

• 2 MM to 8mm
• 1/8 to 5/16
• 8 BA to 2 BA

Length :

• 4 MM to 150 MM  
• 3/16” to 6”

Threads :

• ISO Metric (MM Threads)
• BSW Threads (Inches)
• BA Threads
• BSF Threads
• Any threads as per design.

Standards :

• ISO
• IS
• DIN
• BS
• JIS B
• ANSI

Finishing :

• Nickel Plating
• Chrome Plating
• Tin Plating
• Copper Plating
• Blue Zinc Plating
• Yellow Zinc Plating
• White Zinc Plating
• Silver Plating
• Gold Plating
• Brass Plating
• Any other coating as per customer requirements

Bhalla Fasteners can manufacture any types of Screw  as per customer’s requirement & specifications.