• +91-9041660007 , +91-9211320007

Hub Bolts for Cars

A wheel hub bolt assembly , also referred to as , wheel hub bolt, wheel hub bearing, etc., is an automotive part used in most cars, passenger vehicles, and light and heavy trucks.
The wheel bolt which is bolted on the wheel hub assembly. This assembly is located between the brake drums or discs and the drive axle. Depending on the design and application, the end of hub may or may not have splined teeth. They fit in with the corresponding splines on the axle shaft. These axle hub spins along with the wheels bolted to it and provide the power to the wheels in order to rotate.
To make the rotation of the non-drive wheels a roller bearing is between the axle hub and axle shaft. On the axle side, it is mounted to the holding bracket from the chassis; on the disc side, the wheel is mounted to the bolts of the WHA.
Hub Bolts which we manufacture also have a central hole, which is threaded to receive a bolt, screw, or other threaded part.

Application: Automobiles, Automotive Industry
Grade: 8.8, 10.9, 12.9 grade
Feature: Corrosion Resistance, Hard & Temper
Finish: Auto Black, Zinc, and Hot dip Galvanized
Standard: As per all International Standards
Product Range: 8mm to 48mm Specifications of ASTM A307 / A563 Wheel Bolts
 
Bhalla Auto Manufacturing Co. is producing a wide range of Fasteners including Nuts, bolts and stud Bolts in stainless steel and carbon steel material.
Thread sizes available with us are M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2 M16x1.5, 1/2UNF,5/8UNF,9/16UNF covering over 90% of cars available in the international market. These can also be manufactured according to customized dimensions. The hub bolts are also available in hexagon heads with heads spanner size varying from 17mm to 30mm
 
THREAD LENGTH:  is available we offer a range from 26mm, 28mm, 30mm, 35mm, 39mm, 39mm, 42mm, 45mm, 50mm and 60mm

Carbon Steel Stainless Steel Wheel Bolts
Wheel bolts and studs meet all standards found within SAE J1102. This SAE Standard covers the chemical, metallurgical and mechanical requirements for two types of passenger car and truck wheel bolts in inch sizes, as follows: (a) Non-serrated shank bolts which are heat treated and (b) Serrated shank bolts which are case hardened.